START International ZCM3000 Electronic Heavy Duty Tape Dispenser with Three Programmable Lengths and Counter

The START International ZCM3000 electronic heavy duty tape dispenser with three programmable lengths and counter mechanically cuts and advances predefined tape lengths. The dispenser is suitable for specialized heavy applications, such as cutting non-stretch, reinforced, nylon, or metal tapes. It could actually also dispense cellophane, adhesive, cloth, polypropylene, filament, crepe, double-faced, and non-adhesive tape. The dispenser accepts tape rolls in widths from 0.28 to a few” (7 to 76 mm), with an outdoor roll diameter as much as 8″/203 mm. The use of the LED display panel, the operator can program 3 cut lengths of 1.6 to 39″ (40 to 999 mm). The counter can count as much as a maximum of 9999 tape pieces, or It could actually count down from a programmed number. Once the dispenser counts down to zero (0), feed and cut stops until the counter is reset. Feed and cut will also be set to mechanically advance and cut the material in consecutive order of the 3 programmed lengths. The photosensor detects if there’s tape on the outlet for accurate and consistent feeds and cuts. When set to automatic mode, the sensor feeds and cuts the tape. The feed and cut may also be operated manually with a push button. Programmed lengths will also be overridden for a custom cut, after which returned to the autofeed settings. Feed roller pressure will also be adjusted for tape thickness and to forestall curling. The guillotined cut provides a straight edge to the dispensed tape. Cut length tolerance is + or – 0.04″/1 mm. The core holder incorporates a 3″ roll core. The ZCM3000 tape dispenser operates on 117 VDC at 50/60 Hz. It’s suitable for industrial uses such as manufacturing, assembly, and packaging.

Specifications

H is height, the vertical distance from lowest to easiest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Tape dispensers hold and cut tape. They’re utilized in manufacturing, assembly, and packaging. Tape guns are portable, hand-held tape dispensers which can be useful for small jobs. Table-top dispensers allow an operator to rip off the tape after which bring it to the point of application. Manual table-top dispensers allow an operator to tug and tear any amount of tape, or to dispense a fixed amount of tape by use of a hand lever. Electronic dispensers is also actuated by the rush of a button or by a sensor that detects when the prior to now cut length of tape has been got rid of. Most tape dispensers work with pressure-sensitive tapes, such as transparent place of job tape, packing tape, or strapping tape. Gummed tape dispensers, often referred to as water-activated tape dispensers, work with water-activated adhesive tape. These dispensers moisten each and every piece of tape as It’s dispensed.

START International manufactures tape dispensers, label dispensers, and optical inspection tools. The company, founded in 1981, is headquartered in Addison, TX.

What’s within the Box?

• ZCM3000 electronic tape dispenser
• Power cord
• Instructions