Description
Automatic Thermostat
The ceramic PTC thermistor will assist to keep the constant temperature when it heats as much as the set temperature.
Adjustable Temperature
There is a dial that moves between 100°C-220°C for different use, the velocity of the glue glide is different in step with the different temperature, and you can also need use a small flat-bladed screwdriver spinning at the dial to modify the temperature.
Interchangeable Copper Nozzle
The diameter of the nozzle is about 13mm, orifice diameter is 3mm,length of whole nozzle is about 23mm and you’ll change to the longer one for different use.The copper nozzle has the simpler thermostability than the opposite nozzles.
Tips
1 Diameter of the glue strips must between 10.8mm-11.8mm.If the the applied stick doesn’t match,the glue gun could also be damaged.
2 The nozzle and the glue liquid are hot when the gun is working, please do not touch it.
3 If the glue gun doesn’t work for 15min, please bring to a halt the ability source to steer clear of the melting glue recirculating or damage.
4 It’ll has the sunshine smoke the primary use, It’s normal and it’ll die off 10min later.
5 Please let the bracket stand to chill down the gun for a couple of minutes after use, and do not change the opposite power cord with it.
6 If the strip is left after use, please do not pull it off,just let it within the gun for the following use.
7 It’s normal for some glue flowing out after the few seconds you finish working as a result of the inertia pressure.
Specification
Frequency:50-60HZ
Weight:245g
Cable Length:140mm
Size:190*110mm
Package
1* Hot Glue Gun
Anti-overheating with ceramic PTC thermistor,,automatic thermostat to avoid wasting energy, also retrofit the thermal insulation at the tail to prolong the life of the gun.
3-5 min warm up time,indicator light on when heating and off when it heats as much as the constant temperature.
Temperature adjustable between 100°C-220°C,trigger feed mechanism to controls glide of glue.
Non-drip tip which built in leak-proof valve,insulated and interchangeable nozzle, cooling hole to chill down the temp and a rubber coating for easier cleaning.
100Watts,110-240V,used with the glue strips diameter between 10.8mm-11.8mm,15-20g/min melting out.