Fluke Networks TS54 Pro Telephone Test Set with TDR, Tone Generator, and LCD

The Fluke Networks TS54 TDR test set, To be had with quite a lot of line cord connectors to suit specific applications, Contains a TDR, tone generator, and telephone test set into one tool for testing VDV cabling in addition to POTS quality on live DSL lines without disrupting data products and services. The TDR (time-domain reflectometer) measures cable length and locates faults on virtually all types of cable including twisted pair, coaxial, and parallel conductors, finding the distance to open and short circuits in as much as 3,000′ of cabling. It has an adjustable VOP (velocity of propagation) setting to optimize the accuracy of fault location and cable length measurements. The analog tone generator sends a signal through wires for locating and tracing wires with a probe (sold one after the other), and has five distinct SmartTone cadences for isolating individual wire pairs. The telephone test set is designed for out of doors plant use to detect dial tone and polarity, place and receive calls, indicate line voltage and current, and verify caller ID and call waiting caller ID products and services; has a two-way, adjustable-volume speakerphone for hands-free conversation throughout testing; monitors lines without disrupting service; locks out off-hook testing when high-speed data is detected; and stores as much as nine 23-digit telephone numbers which may also be speed-dialed by the use of the keypad. It provides tone or pulse operation. The test set has two basic modes of operation: talk mode for off-hook operations including verifying dialing and receiving calls, and monitor mode for on-hook operations including checking for an idle line, listening for line noise, measuring DC voltage on the line, and capturing DTMF (dual-tone multi-frequency) tones to check for proper signaling. In monitor mode, the test set provides a high impedance coupling to monitor lines without disrupting service. When switching to talk mode, the data lockout feature tests the line for high-speed data signals and remains on hook and beeps if such signals are detected. The lockout may also be overridden to pull dial tone from a noise line. Telephone test sets, also referred to as butt sets, are used by telecom technicians to troubleshoot and deal with copper-wire voice-subscriber lines such as POTS (plain old telephone service) lines. TDRs are used by network and telecom technicians and installers to troubleshoot, deal with, and optimize performance of VDV (voice, data, and video) cabling.

This test set meets IEC (International Electrotechnical Commission) safety standard 61010-1:2010 and is rated for CAT I installations to 300VDC, which covers equipment on circuits indirectly connected to mains. It passes a 20′ (6m) drop test and is Ingress Protection certified IP64 for protection against dust and splashed water. The test set may also be programmed to turn off routinely after a specified period (default setting is two minutes) of state of being inactive to conserve battery life, and is made of high-have an effect on plastic. The high-visibility glow-in-the-dark keypad has 12 standard dialing keys including star and pound, and serve as keys to store, recall, and redial numbers and to pause for gaining access to a second dial tone when dialing through a PBX (private branch exchange), among other functions. A backlit LCD tracks functions and test status, and displays line voltage from 4 to 140VDC and current from 0 to 120mA. At voltages lower than 4VDC and greater than 140VDC, the test set locks out and won’t allow off-hook operation. It’s made of high-have an effect on plastic and turns on routinely when clipped to an active line. A spring-loaded belt clip on the base of the unit provides a safe hold on belt loops and D-rings, and a jack incorporates a headset (sold one after the other). Additional specifications include quite a lot of environmental operating conditions.

*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Datacom and telecom installation and test devices, such as toners and test sets, check cabling and wiring to lend a hand make sure proper connections and operation. Tone generator and probe sets, also referred to as toners, are used to locate, trace, and isolate cables in copper media networks. Telephone test sets, also referred to as butt sets, are specialized telephones that connect to telephone lines to check for proper operation and to isolate trouble. Some test sets incorporate a TDR (time-domain reflectometer) and toner for determining cable length and locating faults. Even as certain devices can be utilized on live networks, others are only suitable for inactive networks. Field technicians and installers use these devices to set up, deal with, and troubleshoot datacom and telecom cabling within a building or in out of doors plant (OSP) applications.

Fluke Networks manufactures tools for network infrastructure installation, testing, certification, and troubleshooting, in copper, fiber, and wireless networks, with its tools widely used by contractors, enterprises, and communication service providers. The company, which operates globally, is based in Everett, WA.

What’s in the Box?

• Fluke Networks TS54 TDR test set
• 9V battery
• Instructions