AT&T CRL30102 dect_6.0 1 Handset Landline Telephone – Expansion Handset

Description

Blank handset display.

1 –   Confirm proper installation of the telephone base power supply and handset battery.  You will have to only use the power supply provided along with your telephone.  Ensure that the power supply isn’t connected to an electrical outlet that may be controlled by a wall switch. Confirm that the electrical outlet that the telephone is plugged into is working.

2 – When placing the handset within the charging base, confirm that the charge contacts at the handset and base are making a good connection. The CHARGE light at the telephone handset shall be on when the handset is charging.  When charging your cordless phone for the first time, or when the battery is completely dead, after 30 minutes of uninterrupted charging, the handset shall be fully functional; which incorporates the handset display and indicator lights.  There’s enough charge at this point to make use of the telephone for a little while. Note:  It is strongly recommended that you charge your handset battery for the first time for 16 hours to maximize the life of your battery.  After the initial 16 hour charge, keep the handset within the telephone base or charger when not in use.

It is normal for the unit to show LOW BATTERY whilst charging. This will likely go away once the unit has received a minimum charge.  For optimum day-to-day performance, return the handset to its telephone base when not in use.  If the charge light does not come on please see the symptom  Why would possibly not the handset charge light come on?

3 –  For multi handset systems:

Swap the batteries with a known working handset.  If the problem follows the handset, replace the handset if the system is expandable.  Replace the entire system if the system is non-expandable.

For single handset systems or when all HS’s are affected follow the steps below:

Reset the phone:
Step 1: Disconnect the power to the telephone base.
Step 2: Disconnect the handset battery(s).
Step 3:Wait a couple of minutes after which reconnect the power to the telephone base.
Step 4: Reconnect the handset battery(s).
Step 5: Wait about one minute for the handset to re-establish a link with the telephone base after which test the phone again.

NOTE: After resetting the telephone system, it is important to reset the clock:
Step 1 When the phone isn’t in use, press MENU/SELECT.
Step 2 Press ▲DIR or ▼CID until you see >SET DATE/TIME.
Step 3 Press MENU/SELECT.  Use the dialing keys to set the month date and year.
Step 4 Press MENU/SELECT.  Use the dialing keys to set the hour and minute; then press ▲DIR or ▼CID to make a choice AM or PM.
Step 5 Press MENU/SELECT  to confirm your settings.  Press and hold OFF/CANCEL to go back to the idle screen.

4 –  If the battery is not up to 1 year old and talk time is not up to 3 hours, replace the battery under warranty.

If the battery is more than 1 year old and there is a matter with the battery, customer would possibly wish to purchase a new battery.

High Quality DECT6.0,1 HS,CID,CALL WAI
That is as an “Expansion Handset”; it needs a base to operate
Sleek Design
Energy-Star Certified
Requires a CRL32102, CRL32202, CRL32302,CRL32352, CRL32452 to operate
Kindly refer the Product Description section to know troubleshooting issues